Big end roller (£2.00) Big end roller 7/32 x 7/16 standard also plus 0.001 and 0.002 see common parts Qty

Bolt 1/4-24tpi x 2" (£2.75) Bolt 1/4-24tpi x 2" domed head cut to size to use in various places. Qty

Brake peadle spring (£4.85) Brake peadle spring p Qty

Brake spring (£9.85) Brake spring fits H,SD,R,P stops shoe rubbing Qty

Crankcase bolt (£5.25) Crankcase bolt 1/4 24 tpi 4 1/8 long Qty

Crankcase bolt (£5.50) Crankcase bolt 1/4 24 tpi 4 5/8 long. Qty

Crankcase bolt (£6.25) Crankcase bolt 3/8-24 tpi 3 3/8 long. Qty

Drive chain (£9.50) Drive chain and primairy 5/8 x 1/4 Price per foot Qty

Drive chain link (£3.25) Drive chain link Qty

Filler cap 2" (£.00) Filler cap 2" with leather washer.now made to order only. Qty

Filler neck 2" (£.00) Filler neck to fit 2" cap.now made to order only. Qty

Footrest rubber (£25.00) Model P and later footrest rubber. Qty

Frame nut 1/2 (£2.50) Frame nuts Model P 1/2 x 20 tpi x 0.812 thou hex. Qty

Frame nut 3/8 Frame nut 3/8 x 24 tpi x 0.600 thou hex 0.325 long. Qty

Front mudguard (£.00) Fits front of bike. plain section need to be fitted to your bike Qty

Handle bars (£32.00) Handle bars Model P 7/8 Dia. Qty

Headrace set upper (£35.00) Headrace set upper. Qty

Mag bolt (£7.50) 3/8 whit but 3/4 long 4 needed. Qty

Model P exhaust system (£.00) Model P exhaust system front only Qty

Model P exhaust system with tail pipe (£.00) Model P exhaust system with tail pipe Qty

Model P inverted levers (£.00) Model P inverted levers due by and of 2010 made of steel like our veteran levers Qty

Nut domed head 1/4-24tpi Nut domed head 1/4-24tpi used on crankcases bolts also used with our P bolts that are 2" long. Qty

Nuts for cylinder barrel (£2.00) Nuts for cylinder barrel Model P. 3/8 x 24tp1 x 0.525 thou Hex. Qty

P downtube (£20.00) P steel downtube ready to be welded in Qty

piston (£130.00) Model P piston aluminium plus 20 thou with rings and pin. other sizes to plus 60 please enquire Qty

Rear mudguard (£40.00) Fits rear mudguards.plain section Qty

Rubber grips 6 inch. (£25.00) Rubber grips 6 inch.johnbull barrel type open each end for 7/8 bars. Qty

Spares manual Model P 1926 (£6.00) Spares manual Model P 1926. Qty

Stem clamp bolt and nut (£5.50) Stem clamp bolt and nut 5/16 bolt Qty

Stem clamp nut (£2.00) Stem clamp nut 5/16 whit x 18tpi x 440 hex Qty

Tank knee rubbers (£35.00) one set of tank knee rubbers.to suit p and later. Qty

valve (£.00) Engine valve, 0.343" stem overall lenght 4.960". Large slot 0.100" wide. Inlet or exhaust. Qty

Valve cotters p and later (£4.00) Valve cotters p and later 100 thou wide with corners cut off set off 2 Qty

Valve Springs 1 pair LH / RH Wound (£14.00) Model P Valve Springs, One wound left hand and one right hand as orignal. Qty

Washer 1/4 (£1.00) Washer 1/4 x 0.560 x 0.080 thou thick used on crankcase bolts behind nuts. Qty