Click on Model link
Home
1903 TO 1907
1908
1909
1910
1911
1912
1913
1914
Model H
Model SD
Ricardo
Model P
JUNIOR
Other Models
Used Parts
Specials
Common Parts
Contacts
Information
Payments
In
Development
Order new parts
ASK US TO MAKE PARTS
Links
Dating (new) |
|
B100 seat complete
B100 seat complete with leather work ready to finish in black or nickled
|
B170 seat
Complete B170 seat all steel work is laser cut out.Brooks seat casting and steel pan ready to be painted and leather work .
out of stock please enquire
|
B170 seat with leather work
Complete B170 seat all steel work is laser cut out.Brooks seat casting and steel pan but the seat has had the leather work done and a brooks seat badge fitted ( check before ordering for stock )
as seat above but with this leather seat instead of a steel pan.
|
Belt rim standoff long (£4.00)
Belt rim standoff long 3/4 offset.
|
Belt rim Standoff short
Belt rim Standoff short 1/2 offset.
|
Big end roller 7/32 x 7/16 0.001 oversized (£2.00)
big end roller 7/32 x 7/16 fits model H,P,N,Q etc
price each
|
Big end roller 7/32 x 7/16 0.002 oversized (£2.00)
big end roller 7/32 x 7/16 fits model H,P,N,Q etc
price each
|
Big end roller 7/32 x 7/16 standard (£2.00)
big end roller 7/32 x 7/16 fits model H,P,N,Q etc
price each
|
Big end roller early (£2.00)
Big end roller early .3/16 x 7/8 long
|
Bosch advanced lever
Bosch advanced lever for magnetos contact ian@veterantriumph.co.uk
|
Brake spring (£9.85)
Brake spring fits H,SD,R,P stops shoe rubbing
|
Brammer belt 1 1/8 inch wide (£9.00)
Brammer belt 1 1/8 inch wide per foot
|
Brammer belt 1 inch wide (£8.00)
Brammer belt 1 inch wide per foot
|
Brammer belt 1/2 wide (£5.00)
Brammer belt 1/2 wide per foot
|
Brammer belt 3/4 wide (£8.00)
Brammer belt 3/4 wide per foot
out of stock till april
|
Brammer belt 7/8 wide (£8.00)
Brammer belt 7/8 wide per foot
|
Bridge for front mudguard (£18.00)
Bridge for front mudguard suit early Veterans.Bronze casting
|
Brooks interspring for seat (£19.00)
Brooks interspring for seat 1 pair
|
Brooks seat badge (£11.50)
Brooks seat badge 10mm x 61 mm long.
|
Brooks seat cover B100 (£110.00)
Brooks seat cover B100 . Black leather stamped with B100 and brooks.
|
Brooks Seat Pan (£40.00)
Brooks Seat Pan fits B170 / B130 plus many others.
|
Brooks seat spring B130 (£20.00)
Brooks seat spring B130 2 coils less then this photo 1 pair
|
Brooks seat spring B170 (£20.00)
Brooks seat spring B170 as this photo on pair
|
Brooks seat swivel lost wax casting (£40.00)
Brook seat swivel lost wax casting comes with clamp bolt and nuts plus 2 large washers.fits 7/8 seat post. suitd b170 and b130 seat plus many others.
|
Brooks toolbox catch dog bone (£125.00)
Brooks Tool box catches dog bone style veteran / vintage triumph
We have made a batch of 50 sets (2 per set) of the original brooks catches used on triumph, sunbeams, velos, Norton's etc bikes from the early 20's they are brand new nickeled plated made from brass and been stamped out the only difference is their no lock inside or key.
|
Cable end bag of 5 1244 (£2.00)
Cable end bag of 5. Size 3.1 dia by 3.1 long. Solder type.
|
Cable ends, bag of 5 - 695 (£2.00)
Cable ends, bag of 5. Size 2.8mm dia by 5 long. Solder type.
|
Cable ends, bag of 5 - 783 (£2.00)
Cable ends, bag of 5.Size 4 mm large dia, 2.65 small diam by 5.8 long. Solder type.
|
Cable ends, bag of 5 - 1743/25 (£2.00)
Cable ends, bag of 5. Size 6 mm dia x 5.5mm long brass. Solder type.
|
Cable ends, bag of 5 - 2451p (£2.00)
Cable ends, bag of 5. Size 5 mm on large dia, 3.5 on small dia by 8 mm overall length. Solder type.
|
Cable ends, bag of 5 - 2448/51 (£2.00)
Cable ends, bag of 5, half ball 6 mm dia by 5.5mm long. Solder type.
|
Cable No.0 (£3.00)
Cable no.0. One metre of black outer, one metre of inner steel cable. Any length up to 20 metres.
|
Cable No.1 (£3.00)
Cable no.1. One metre of black outer, one metre of inner steel cable. Any length up to 20 metres.
|
Cable No.2 (£4.00)
Cable No.2 price per meter inter and outer
|
Cotter pin (£2.50)
Cotter pin for kickstarters
|
Drive pulley nut (£40.00)
Drive pulley nut onlt fits standard pullys as tt has larger thread
|
Foot rubbers one pair (£25.00)
Foot rubbers one pair
|
Fork generator Bracket (£10.00)
Fork generator Bracket for Front fork bolts investment cast to keep all fine details 2 needed
|
Grips Cellulose (£32.00)
Cellulose / Resin type grips.Hard black plastic. 3 5/16 long 7/8 bore fit all veterans.1 pair.
|
Grips rubber (£25.00)
Rubber Grips 4 1/2 long for 7/8 bars fits h and later models.John Bull Type open both ends 1 pair.
|
Handle bar casting (£20.00)
Handle bar casting fit Vintage and Veteran needs machining two suit your application.
|
Lever oilier large (£7.50)
Lever oilier large used on most models engraved with triumph on it.
|
Lever oilier small (£7.50)
Lever oilier small used on early veterans engraved with triumph on it.
|
Mag spring (£2.00)
Mag spring used in Bosch advanced unit.
|
Mag stay nut (£1.50)
Mag stay nut 1/4 x 24tpi thread by 1/4 wide x 440thou hex
|
Mag stay set screw (£2.50)
Mag stay set screw
|
Mc 22 Bearings special (£45.00)
We have had a small batch of mc22 special made same OD and width as original but id is 21.80mm. So if you have a crank with damaged on the journals or they are bent you can get them reground true.
|
Mc22 bearings (£42.00)
Mc 22 main bearings 22id 50 od 17 wide. Now obsolete, we have them made in batches of 50 to keep price down. Also used in Nortons and Sunbeams.
|
Mudguard bolts 1/2 (£3.50)
Mudguard bolts 1/4 x 24 Tpi x 1/2 long fits stay etc
|
Mudguard bolts 3/8 (£3.25)
Mudguard bolts 3/8 1/4 x 24Tpi x 3/8 long
|
Number plate backet (£12.00)
Number plate backet Bronze investment casting
|
Oil pump leather washer (£1.00)
pump washer 15/16 od.
|
Oval tube
Oval tube made for stands on veteren and early models 7/8 x 1/2 od by 2 foot long
|
Peddle frames ealry (£30.00)
Peddle frames steel frame to hold D type rubber
Complete with bolts to hold D rubber in
Set of 2
with early end plates
|
Peddle frames late (£30.00)
Peddle frames steel frame to hold D type rubber
Complete with bolts to hold D rubber in
Set of 2
with late end plates
|
Piston 1911-1913
Piston 1911-1913 brand new cast iron piston in either 85 ,85.5,86 mm with new pin and circlips . ground to size on od with rings please state size
|
Piston 1914
Brand new 1914 cast iron piston in either 85 ,85.5,86 mm with new pin and circlips . ground to size on od with rings please state size
|
Piston ring set (£20.00)
2 new cast iron piston ring to fit Baby triumphs
64mm bore 6mm wide 3mm radial
|
Piston ring set (£20.00)
2 new cast iron piston ring to fit Baby Triumphs
they fit later babys and our new Pistons that are geting made
64.5mm bore 4mm wide 3mm radial
|
Piston ring set (£20.00)
2 new cast iron piston ring to fit Baby Triumphs
they fit later babys and our new Pistons that are geting made
65mm bore 4mm wide 3mm radial
|
Piston ring set (£20.00)
2 new cast iron piston ring to fit early veterans
84mm bore 6mm wide 3mm radial
|
Piston ring set (£20.00)
2 new cast iron piston ring to fit veterans and H,SD
85mm bore 6mm wide 3mm radial
|
Piston ring set (£20.00)
2 new cast iron piston ring to fit early veterans
84.5mm bore 6mm wide 3mm radial
|
Piston ring set (£20.00)
2 new cast iron piston ring to fit veterans and H,SD
85.5mm bore 6mm wide 3mm radial
|
Piston ring set
2 new cast iron piston ring to fit model P , N , Q Etc
84mm bore 4mm wide 3mm radial
|
PIston ring set (£20.00)
2 new cast iron piston ring to fit P,N,Q etc
84.5mm bore 4mm wide 3mm radial
|
Single lever (£90.00)
Single lever all newly made from steel no brass to bend like repro ones getting made. Made to suit 7/8 bar. Ready to be nickeled comes with clamp plate and 2 screws.
|
Single lever nickled (£120.00)
Single lever all newly made from steel no brass to bend like repro ones getting made. Made to suit 7/8 bar. Nickeled comes with clamp plate and 2 screws.
|
Spark plug lead black outer (£2.50)
Spark plug lead. Black rubber outer. Price per metre.
|
Spark plug lead braided outer (£3.25)
Spark plug lead. Braided outer cover. Price per metre.
|
Spark plug terminal solder type (£1.40)
Spark plug terminal. Solder type. Price each.
|
Stand arm L/H (£.00)
Made from our new partens L/H stand casting fits oval tube.
|
Stand arm R/H (£.00)
Made from our new partens L/H stand casting fits oval tube.
|
Stand frame lug (£10.00)
Stand frame lug made from our new parterns. 2 needed.
|
Stem clamp nut (£2.00)
Stem clamp nut 5/16 whit x 18tpi x 440 hex
|
T peice nut 3/8 (£4.25)
T peice nut 3/8 x 24 tpi.
All so fits baby rear wheel nuts
|
T piece nut 7/16 (£4.25)
T peice nut 7/16 x 20 tpi
|
Taper tube (£.00)
Taper tube to repair front forks on early Triumphs.
15.5mm small end
22.2 mm large end
450mm overall length
taper is over 300mm area
|
Transfer 1 (£6.50)
Price each 1906 to 1915 not considered original
|
Transfer 2 (£6.50)
Price each
headstock upto 1928
|
Transfer 3 (£10.50)
Price each this is a copy of a original one we have just had made
early veteran
copy of 1908
|
Transfer 4 (£6.50)
Price each 1915 to 1928 not considered original
|
Transfer 5 (£10.50)
Price each this is a copy of a original one we have just had made
late veteran
copy of 1914
|
Transfer 6 (£6.50)
Price each
model H and D war renovated
|
Transfer 7 (£7.00)
Price a Pair
early veterans
I think to 1910
|
Transfer 8 (£7.00)
Price for a pair
Model H and later to 1923
|
TT Drive pulley (£230.00)
TT Drive pulley for top end speed fit 1908 to 1914 tt models.
|
Twin lever (£120.00)
Twin lever all newly made from steel no brass to bend like repro ones getting made. Made to suit 7/8 bar. Ready to nickel comes with clamp plate and 2 screws.
|
Twin lever nickled (£160.00)
Twin lever all newly made from steel no brass to bend like repro ones getting made. Made to suit 7/8 bar.Nickeled comes with clamp plate and 2 screws.
|
Twist lubrictor (£6.50)
Twist lubrictor used of fork stems and many other places on all triumph 1 ba thread.
|
Washer 1/2 (£1.00)
Washer 1/2 x 1 x 0.080 thou thick
|
Washer 1/4 (£1.00)
Washer 1/4 x 0.560 x 0.080 thou thick.Used on Model P crankcases.
|
Washer 3/8 (£1.00)
Washer 3/8 x 3/4 x 80 thou thick
|
Washer 5/16 (£1.00)
Washer 5/16 x 0.590 x 0.080 thou thick. Used on baby triump seat bolt and on all model on the steering stem clamp bolt.
|
Washer 7/16 (£1.00)
Washer 7/16 x 0.850 x 0.080 thou thick
|
|
 |
|
